PSP Advice - Replacing a PSP LCD screen

This post is based on replacing a LCD screen on an original PSP

Again for this you will need your trusty small Flathead screwdriver. Gently on the left hand side slide your screwdriver into the groove between the screen and the LCD housing as pictured below. There are two places to do this, one at the bottom left hand side and again on the top left hand side.

Doing this will pop the tabs on the LCD housing bracket that is holding the LCD screen in place. You will then be able to lift the left hand side of the LCD screen up then gently pull the LCD screen so it comes out of the other side. Once this is done you can tilt the LCD screen so it sits upside down out of the metal LCD housing bracket as pictured below.

The screen is connected to the motherboard by two connector cables, but you have to be careful at this stage so that you do not pull the screen connector cables from there clips. This could damage both the screen cables and the clips on the motherboard, then a simple repair turns into a major one.

The larger cable flex is for the screen itself, the smaller one is for the back light. With your Flathead screwdriver lift the connector clips and this will then release the LCD screen. Again be gentle doing this, too much pressure and you could damage the clip.

If you are replacing your LCD screen simply take the new one out of the packet, place the screen cable flex's back in the connectors, the back light cable flex needs gently pushing in with the screwdriver, if you look closely at one it has little arms on the side which you can use just to slide in. Once the cables are in just do the reverse of above instructions and you will then have a fully functioning PlayStation Portable. If you are removing the screen to carry out another repair, place the screen face down on the PSP faceplate, this will then keep it free of dust and scratches etc.

Why Repair a PSP?

The most obvious reason is cost, it can be considerably cheaper for you to repair your PSP rather than send it away to be fixed, unless it is under warranty anyway. A Playstation Portable console is not a cheap item to purchase, so the last thing you want to be doing is either sending it away for costly repairs of even purchasing a new PSP because your current one is faulty.

There are many console repair companies on the internet and obviously Sony themselves but there is no reason why most repairs can not be done by yourself at home in your spare time.

Now it is not for everyone, not to say that you need a massive amount of technical knowledge but some of the repairs can become quite complicated, ie, motherboard issue or replacing a UMD drive. It is okay taking a PSP apart but you need to be able to put it back together again, you need to keep track of which screws go where and that all you connector cables/ribbons are connected, but it is all possible with a little bit of time and patience.

In most cases you can get all the replacement parts you need of the internet and cheaply too, especially from Ebay. If you are in any doubt about fixing a PSP console youself then ofcourse let a professional look at it for you, but otherwise give it go and if you find you can fix the problem yourself you will find it extremley rewarding whilst also saving a bit of money in the process.